Welcome to the Plumis fire protection blog. Stay informed about domestic fire safety, fire building regulations and ADB-compliant solutions for open plan living. Please feel free to browse through the posts and comment about what you read.

Friday, 15 June 2012

Fire suppression and ADB - Bespoke or pre-engineered?

At Plumis we are frequently asked how Automist fits with the sprinkler standard BS9251, and more recently the water-mist standard DD8458.  The question is understandable because sprinklers are the only compensatory measure explicitly mentioned in Approved Document B – Volume 1 – Dwellinghouses, and Automist can at first sight appear to be a sprinkler system.

Some Popular Misconceptions

Approved Document B states that if sprinklers are used for compensatory purposes, they “should be designed and installed in compliance with BS9251:2005”. This clear guidance is often interpreted too broadly, however. ADB does not state that sprinklers are the only permissible compensatory feature; indeed, a moment’s reflection tells us that many options such as fire curtains are in common use. Nor does it mandate that where alternatives to sprinklers are used, these should also comply with BS9251. Instead it says that “0.18. There are many alternative or innovative fire suppression systems available. Where these are used it is necessary to ensure that such systems have been designed and tested for use in domestic buildings and are fit for their intended purpose.” It is this clause that applies to innovative fire suppression systems like Automist.
For us to better understand why ADB is worded this way, and its consequences, it is necessary to understand what a sprinkler system is in essence and why standards compliance is required for sprinklers, but not for other solutions.

Sprinklers – a bespoke solution

A sprinkler is not an off-the-peg, “what you see is what you get” product.  It is a project-specific selection of components that will perform as intended only when selected and assembled correctly.  Its modularity makes it very flexible, allowing it to scale, covering areas from 10m2 to 100,000m2 and addressing settings from small houses to huge warehouses using exactly the same components.  However, the modularity has a consequence: complexity. With elements such as nozzle flow and spacing, pipe diameters, pump pressure and flow, tank size and many other details subject to variation, a strict protocol must be followed for the system to perform correctly. Standards are a way for us to codify the art of custom sprinkler system design and installation so that specifiers, regulators and users of the technology can be confident that the intended performance will be achieved, however the technology is deployed. The term designed is apt: each sprinkler system is tailored; components are carefully selected and matched for each project. Like a LEGO kit, it begins life as a set of building blocks, but the similarity ends there. Even after well over 100 years of sprinkler use, sprinkler design remains a very technical endeavour, with lives depending critically on correct design, component selection and assembly.
This modularity and flexibility of course imposes a “cost of design” on every installation, but economies of scale render this cost less significant as project size increases.  It should be no surprise that sprinklers are a cost effective solution for protecting shopping centres, large warehouses and hotels.
We’ve called sprinklers a bespoke solution – let’s continue the tailoring metaphor. With a bespoke suit, an immense variety of styles and sizes can be achieved, but this freedom demands great skill of the designer, who must understand how to use a certain fabric and a certain cut to achieve a result that matches the style of the wearer and the purpose of the suit. The tailor has the training and experience to know what will work and what won’t, what’s in and what’s out, and a great suit also depends on painstaking measurement and manufacture. The end result is an expensive product, but for some situations this cost is justifiable.
Back in 1881 when Grinnell invented the Automatic Sprinkler, clothing was expensive and largely made to measure. Yet the intervening years have seen an explosion of innovation, enabled by low-cost mass production of “off the peg” clothes.
Some similar themes arise when comparing Automist to conventional sprinklers. With a pre-engineered product like Automist, what you see is what you get.  Instead of the design work being done in situ for the specific project, this is done upfront, by the manufacturer, and embedded within the product.  There are no tanks, no selection of pumps and pipes, because these characteristics are frozen into the design of the finished product. The result is a ready-made solution which requires technical rigor in a greatly reduced domain and for a smaller and simpler set of tasks around specification and installation. Eliminating most of the design work provides an obvious cost benefit, but with a flipside: although Automist retains some modularity of mist heads, it is much less flexible and scalable than a sprinkler system. An Automist unit designed to protect 1-2 rooms with an area of 32m2 would never be cost-effective if scaled up to serve an entire shopping mall or stadium. As with off-the-shelf clothing, customisation is sacrificed for the benefits of simplicity and convenience, and although it will not be the chosen solution for every occasion, Automist performs well for the simple needs of many customers.

A different approach

The buying experience for a bespoke suit is quite different to that for “off the peg”. In the bespoke case, an expert follows a complex measuring process, draws on deep experience and painstakingly produces the garments, creating something unique. An off-the-shelf suit lacks uniqueness – though some “modularity” remains, through mixing and matching of trousers and jackets. The buying experience is focused more on ensuring that we have found a suit that is going to work for the occasion.
A similar comparison applies to specifying sprinklers, versus pre-engineered solutions.  A sprinkler is custom designed for an area: regardless of what the area looks like, it can be done.  Pre-engineered solutions are really a compatibility exercise: does this readily available solution fulfil the need?  For a domestic scenario we would need to ask: is the area that needs to be protected adequately covered by the proposed solution?  Will it suppress a fire?  Approved Document B actually reflects this idea: it states that if sprinklers are used, the design should follow a standard; if an alternative is used, it must simply be compatible with the application being proposed.
The same applies to fire performance.  Since both conventional and water-mist sprinklers operate from the ceiling, the historically established relationship between suppression effectiveness and ceiling temperatures do not apply objectively to systems like Automist which have low spray heights.  Since the measurement of temperature to evaluate survivability is in effect a subjective measurement (because the inference of survival depends on the constancy of these spray patterns), ceiling temperature measurements simply are not applicable for other types of system. This is why Automist was tested using the most objective method currently available: Fractional Effective Dosage of heat and asphyxiant gases.  In the suit analogy, a subjective judgement can be compared to taste, and "in matters of taste, there can be no disputes".
Products in the pre-engineered suppression category will eventually have fire performance standards of their own. As with smoke control curtains and AOVs (Automatic Opening Vents), such standards emerge following long-term product maturation of the product category, once patents have expired and several competing products have become widespread.

A brighter future through smarter standards

A more flexible set of fire safety standards has recently arrived in the form of BS9991, PD7974, and even the most recent versions of Approved Document B. These standards in their very nature permit a wider range of innovative solutions like Automist, and serve to remind us that the best standards are outcome-focused rather than locked in to a particular design approach or product category.
Without innovation, we have stagnation. If the fire protection industry is to have a bright future in the UK, it will be through this smarter and more flexible approach, enabling a thriving market for innovative fire protection solutions. With this flexibility, appropriate combinations of a wide range of technologies – both simple and sophisticated – can be deployed to solve the problem at hand, providing better cost-effectiveness, wider compliance with the law, and improved fire safety.

Saturday, 2 June 2012

The emergence of the open plan kitchen diners in the UK

Sprawling, bright living spaces have become a modern trend with the number of kitchen-diners rising by almost 50 per cent in the past decade.

One in three homes now features a kitchen-diner, and one in five Brits plans to blend their separate living room and cooking spaces into a single area, a survey found.
The growing popularity of open plan spaces applies to all types of property from new homes to Edwardian, Victorian, and Georgian era houses, according to the survey of 2,000 home owners.

One third of all work carried out on period properties was to create an open plan kitchen and dining room, while one in three applications lodged at eight randomly chosen councils related to opening up indoor space.

One in ten home owners has spent more than £35,000 making alterations in the past ten years, with half of those spending more than £50,000.

But of those who tried to convert their homes, one in five caused damage in the process costing an average of £8,000.

A separate survey predicted in 2008 that the traditional dining room with a dinner table and special cutlery could become obsolete by 2020.

Simon Hamilton, International Director at the British Institute of Interior Design, said: "The inside of homes are starting to look very different. Houses, especially older ones, were designed with set rooms for set activities.

Paula Llewellyn, of Lloyds TSB Home Insurance, which commissioned the new survey, said: "Rather than moving, people are adjusting their own property to create their dream home and the living space they need.

"It's clear to see that open plan living is what modern families want."

What do you need to think about when designing an open plan kitchen?

You really have to consider all the activities that will take place in the room, and how they can work together in harmony. Preparing meals, watching television, surfing the net, doing homework, paying the bills, relaxing with a magazine and chatting with friends – you have to make sure these can all happily co-exist in your open plan kitchen.

To cater for all these different needs, it’s always best to create an individual, custom-built kitchen. And to do that, it’s wise to choose an experienced designer. An experienced kitchen designer is used to helping homeowners maximise the space and functionality of a room and ensure there is a seamless feel between all parts.

What are the practical considerations?

Open plan layouts often struggle to meet building regulations requirements for fire safety: the regulations are very prescriptive in nature and often mandate undesirable compartmentation. UK regulations allow the use of fire suppression to compensate for poor compartmentation, but many homeowners instead opt for the cheap solution: create a protected corridor, have Building Control sign it off, and remove this “dummy wall” shortly afterwards. This leaves everyone uncomfortable, with homeowners paying for pointless and illegal changes to their home and loft converters risking their reputation. 

Approved Document B, offers an alternative stating that:

Fire safety engineering is a recognised method of achieving adequate fire safety in a building. It takes into account the entire fire safety engineering package and is sometimes the only viable method of achieving a satisfactory standard of fire safety in popular open-plan kitchen-diners.

It is this approach that can often be coupled with a volume protection system to ensure homeowners can create real value in their homes without aesthetic trade-offs and Building Control officers can be assured that a modified home is a safe living environment with no limitations on use that may eventually be circumvented by the occupier.